Vacuum solutions for technical processes and laboratories

Published: 19-Aug-2016

Busch will present a range of vacuum solutions for laboratory applications at Ilmac (Basel, Switzerland)

Vacuum systems from Busch are individually designed and made to meet specific customer requirements. As such, Busch specialists are able to draw on an extensive product portfolio to mix and match individual modules to create optimised vacuum systems.

With COBRA dry screw vacuum pumps, Mink dry claw vacuum pumps, Dolphin liquid ring vacuum pumps or the proven R5 oil-lubricated rotary vane vacuum pumps, four different vacuum technologies are available for use as backing pumps in vacuum systems.

Several types of vacuum booster in a variety of sizes are also available. Furthermore, ATEX-compatible versions can also be supplied. Busch offers a special ‘ATEX-Check’ for companies in the chemical, pharmaceutical and biotechnology sectors.

In the process, all ATEX-relevant vacuum pump components, monitoring sensors and electric motors are checked. A test report is created, which serves as proof that the equipment complies with legal requirements.

Busch also offers an extensive range of vacuum generators for laboratories. The new series of Zebra two-stage rotary vane vacuum pumps for the medium vacuum sector will be on show at Ilmac.

These pumps enable ultimate pressures of 6.7 x 10-3mbar to be generated for a pumping speed of 3.5–90m3/h (50Hz). Zebra two-stage rotary vane vacuum pumps are oil-lubricated and thus extremely robust for many applications in the laboratory.

With the Fossa scroll vacuum pump, Busch demonstrates one way to generate a medium vacuum with a dry compression principle so that extracted gases do not come into contact with operating fluids. The R5 RE 0016 B oil-lubricated rotary vane vacuum pump, also on display, is approved for EX II 1/2 G IIB3 T4, category 1 inside and T4 inside and outside the vacuum pump.

You may also like