Rice University reactor allows point-of-use hydrogen peroxide production

Published: 30-Oct-2019

The researchers' electrosynthesis process uses an oxidised carbon nanoparticle-based catalyst to enable point-of-use production that eliminates the dangers of transportation

Rice University researchers have developed a reactor to produce hydrogen peroxide through a much safer and simpler process. The reactor developed by Haotian Wang and his colleagues at Rice's Brown School of Engineering requires only air, water and electricity to make the valuable chemical in the desired concentration and high purity.

Their electrosynthesis process, detailed in Science, uses an oxidised carbon nanoparticle-based catalyst and could enable point-of-use production of pure hydrogen peroxide solutions, eliminating the need to transport the concentrated chemical, which is hazardous.

By using a solid electrolyte instead of traditional liquid electrolyte, it also eliminates the need for product separation or purification used in current processes, so no contaminating ions will be involved.

"If we have electricity from a solar panel, we can literally get hydrogen peroxide from just sunlight, air and water," said Wang. "We don't need to involve organics or fossil fuel consumption. Hydrogen peroxide synthesis by traditional, huge chemical engineering plants generates organic wastes, consumes fossil fuels and emits carbon dioxide. What we're doing is green synthesis."

By using a solid electrolyte instead of traditional liquid electrolyte, it also eliminates the need for product separation or purification

Hydrogen peroxide is widely used as an antiseptic, a detergent, in cosmetics, as a bleaching agent and in water purification, among many other applications. The compound is produced in industrial concentrations of up to 60% solution with water, but in many common uses, the solution is far more diluted.

"Industrial hydrogen peroxide has to be transported in high concentrations to maximise the economics," Wang said. "Transportation is hazardous and costly because the concentrated compound is unstable. Hydrogen peroxide also degrades over time, and has to be stored once it gets to its destination."

"Our technology delocalises the production of hydrogen peroxide," he said. "As renewable electricity input gets cheaper, air is free and water is also cheap, our product should be competitive in terms of price."

"Instead of storing containers of hydrogen peroxide, hospitals that use it as a disinfectant could in the future turn on a spigot and get, for instance, a 3% solution on demand," Wang said. "Instead of storing chemicals to disinfect pool water, homeowners can flick a switch and turn on the reactor to clean their pools."

Rice University researchers – from left, Chuan Xia, Haotian Wang and Yang Xia – show a scaled-up hydrogen peroxide reactor that makes the valuable chemical using just air, water and electricity. Their work appears in the journal Science. (Credit: Brandon Martin/Rice University)

Rice University researchers – from left, Chuan Xia, Haotian Wang and Yang Xia – show a scaled-up hydrogen peroxide reactor that makes the valuable chemical using just air, water and electricity. Their work appears in the journal Science. (Credit: Brandon Martin/Rice University)

Technicals

The Rice reactor is somewhat similar to a fuel cell, with electrodes on either side to process hydrogen (or water) and oxygen (from air), feeding them to catalysts on two electrodes sandwiching an ionically conductive porous solid electrolyte.

"A fuel cell minimises the production of hydrogen peroxide to produce just water with maximised energy efficiency," said Rice postdoctoral researcher and lead author Chuan Xia. "In our case, we want to maximise hydrogen peroxide instead, and have tuned our catalyst to do so."

The low-cost carbon black catalyst, set in a solid electrolyte and oxidised to enhance its reactivity, shifts the oxygen reduction pathway towards the desired chemical at rates and concentrations determined by the applied voltage, air and water feedstock and a steady supply of deionised water. The reaction takes place under ambient temperatures and pressures.

Co-lead author Yang Xia, a second-year graduate student in the Wang lab, said the catalyst proved robust enough to synthesize pure solution of 1%-by-weight hydrogen peroxide over 100 continuous hours in the lab with negligible degradation.

Wang said the lab plans to engineer both larger reactors and plug-and-play components with an eye toward testing with industrial partners. He sees great promise for industrial-scale applications like municipal water purification systems. The Rice lab has tested low concentrations of its product on campus rainwater and proved its ability to remove organic carbon contaminants.

"There are so many potential applications," he said. "Before this, electrochemical synthesis of hydrogen peroxide was limited by its product separation or purification process, but we've solved the big barrier to practical applications."

Rice graduate student Peng Zhu and academic visitor Lei Fan are co-authors of the paper. Wang is the William Marsh Rice Trustee Chair, an assistant professor of chemical and biomolecular engineering and a 2019 CIFAR Azrieli Global Scholar.

You may also like