The tip-and-pour method, as well as poorly designed pumps, can expose workers to injury and companies to significant financial losses
In the manufacturing of plastics, workers often transfer potentially hazardous liquid additives such as plasticisers, colourants, dyes, lubricants, antimicrobials and flame retardants into smaller containers, vessels or directly into tanks or machinery. At times, liquid solvents and cleaners used for maintenance may be transferred as well.
Chemicals such as acetone are also used in plastics machining and for 3D printed parts for vapour polishing, which, when applied to the surface of plastic, alters the finish to a high gloss.
However, this transfer of chemicals at the point of use, whether it’s done in plastics manufacturing, fabricating or machining, can have serious consequences when manual “tip-and-pour” techniques or poorly designed pumps are used.
These chemicals are toxic, corrosive, reactive, flammable, emit volatile organic compounds (VOCs) or are even potentially explosive and the danger of accidental contact, even for short periods, can pose a severe hazard to workers.
In addition to the potential for injury, there can also be serious financial ramifications for the facility involved. The risks include the cost to treat injuries or perform clean-up, as well as workers’ compensation claims, potential liability, OSHA fines, loss of expensive chemicals and even facility/production shutdown.
“It can be catastrophic to a company if toxic or highly flammable material is accidentally released at the point of use,” says Deborah Grubbe, PE, CEng, and founder of Operations and Safety Solutions, a consulting firm specialising in industrial safety. “Companies have to assume that if something can go wrong during chemical transfer, it will, and take appropriate precautions to prevent what could be significant consequences.”
Grubbe, who has 40 years of experience working in the chemical, oil and gas industries, including at DuPont, NASA, and for the US military, says: “Any time you lose containment, you have an issue that can spiral out of control.”
Corrosive chemicals, for example, can burn skin or flesh. Some chemicals are toxic when touched or inhaled. Cyanotic agents, for instance, can be particularly dangerous or even fatal, as they rob the body of oxygen.
Many chemicals are flammable as well and can be ignited by even the smallest spark from nearby motors or other mechanical equipment. “There is no such thing as a small fire in my business,” says Grubbe.
In addition to cost of clean-up or treating injuries, there are also indirect costs that can be incurred. These include supervisors’ time to document the incident and respond to any added government inspection or scrutiny, as well as the potential for temporary shutdown of the facility.
“The indirect costs can be as much as 2–4 times the direct costs,” says Grubbe. “Not to mention potential liability, workers’ compensation issues, regulatory fines or potential actions from OSHA or the EPA.”
Traditional practices of transferring liquid chemicals suffer from a number of drawbacks.
Manual techniques, such as the tip-and-pour method, are still common today. Tipping heavy barrels, however, can lead to overpouring or the barrel toppling.
“Some companies choose to transfer of chemicals manually, but it is extremely difficult to control heavy drums,” cautions Grubbe. “I’d recommend against it because of the probability of a spill is so high.”
Although a number of pump types exist for chemical transfer (rotary, siphon, lever-action, piston and electric), most are not engineered as a sealed, contained system. In addition, these pumps can have seals that leak, are known to wear out quickly, and can be difficult to operate, making precise volume control and dispensing difficult.
In contrast, sealed pump systems can dramatically improve the safety and efficiency of chemical transfer.
“A sealed, contained system is ideal when dealing with a toxic, flammable, or corrosive liquid,” says Grubbe. “With sealed devices, such as GoatThroat pumps, you can maintain a controlled containment from one vessel to another.”
Small, versatile, hand-operated pressure pumps, such as those manufactured by GoatThroat Pumps, are engineered to work as a sealed system. The pumps can be used for the safe transfer of more than 1400 industrial chemicals, including the most aggressive acids, caustics and solvents.
These pumps function essentially like a beer tap. The operator attaches the pump, presses the plunger several times to build up a low amount of internal pressure and then dispenses the liquid. The tap is configured to provide precise control over the fluid delivery, from slow (1mL/1 oz) up to 4.5 gallons per minute, depending on viscosity.
Because such pumps use very low pressure (<6 PSI) to transfer fluids through the line and contain automatic pressure relief valves, they are safe to use with virtually any container from 2 gallon jugs to 55 gallon drums.
East Coast Precision Manufacturing is a precision plastic part fabricator that machines many types of plastics such as acetal, abs, acrylic, nylon, PVC, PTFE, phenolics, and polycarbonate.
To improve the safety and efficiency of one of its processes, the Chester (CT, USA)-based company sought to upgrade from a manual tip and pour method of transferring chemicals from a 5 gallon drum into a designated vessel.
“We wanted to avoid the potential strain or spillage of pouring from a 5 gallon drum,” says Chris Marchand, an East Coast Precision Manufacturing engineer. “We needed a pump that was able to safely contain and resist aggressive chemicals.”
As part of his online research, Marchand decided to utilise a sealed chemical pump system from GoatThroat.
“Because the GoatThroat pump system is sealed and uses low pressure to transfer chemicals, it prevents overpouring, spills, leaks, and keeps any potential VOCs contained,” says Marchand. “We have found that it minimises clean up and eliminates wasted inventory and content evaporation.”
Marchand appreciates that an available version of the pump is safe to use around flammables because it is static conductive, and another version is explosion proof, though those capabilities are not required for his process.
He notes that the sealed pump system is easy to use, as operators only need to pump the plunger a few times and then open a tap.
“It is a much safer, more controlled approach than trying to lift and pour chemicals from a heavy 5 gallon drum,” concludes Marchand. “We expect to get many years of use from our labour-efficient, flow engineered system.”