Natoli and Casburt create a new division

Published: 4-Mar-2008 Featured companies: Natoli Engineering Company
Manufacturing

Sales of tablet compression tools across Europe are set to rise with the launch of a new division created between Natoli Engineering Company and Casburt TMS.


Sales of tablet compression tools across Europe are set to rise with the launch of a new division created between Natoli Engineering Company and Casburt TMS.

Natoli Europe covers all aspects of tablet production, including training and production optimisation through the development of a UK-based "Centre of Excellence".

Geoff Charlesworth, director and general manager of Casburt TMS, said: "Building on the successful partnership with Natoli will allow the Casburt business to expand into Europe and enable us to provide customers with additional products and enhanced services including; tooling refurbishment, tablet compression education and training, a wider range of spare parts and equipment demonstrations."

Featured companies

Not only the undisputed leader in tablet compression tooling, Natoli Engineering offers a full line of products and services to assist at all stages of the tablet and...
See more

You may also like

Manufacturing

Powder rheology: Gateway for tablet sticking insights

Read more
Authors: Devang Patel, Kerry Cruz, Robert Sedlock, Rahul Haware

Trending Articles

  1. Catalent and AstraZeneca to expand support for COVID-19 vaccine AZD1222 Catalent will prepare the Harmans facility, close to Baltimore-Washington International (BWI) airport, to enable multiple production trains to run in parallel to produce the vaccine candidate drug substance commencing late in the third quarter of 2020
  2. Chemistry, manufacturing and control (CMC) as key drivers for drug discovery success Embracing collaborative strategies not only accelerates drug development programmes but also fosters science-based milestone decisions, mitigates risks and prepares for successful market entry from the early stages of development, reports Frederick Duynslaeger, Senior CMC Writer at Ardena
  3. Bristol Myers Squibb and Cellares partner to expand CAR-T manufacturing capabilities Cellares will optimise and automate select Bristol Myers Squibb CAR-T cell therapies onto its high-throughput manufacturing program, the Cell Shuttle
  4. Automate LC purification & high-purity compound recovery with UFPLC The purification instrument allows manufacturers to extract high-purity compounds in a shorter timeframe
  5. Degassers for fluidic applications The range employs a constant vacuum degassing system and can deal with a wide range of flow rates

Relevant companies

See more

Upcoming event

Cleanroom Conference UK

22–23 May 2024 | Exhibition | Birmingham, UK See all

You may also like

Manufacturing

Powder rheology: Gateway for tablet sticking insights

Authors: Devang Patel, Kerry Cruz, Robert Sedlock, Rahul Haware
Manufacturing

Bevel edge or radius edge flat face tablets: Which is better for greater consumer acceptance?

Consumers and patients should perceive that their tablets are easy to swallow and devoid of any undesirable taste. Tablet manufacturers can influence acceptance of by producing tablets that appear easy to consume
Manufacturing

Natoli Engineering helps set a global standard of efficiency

With Natoli Advantage save on costs by using a standardised process for training and management of tablet compression and encapsulation tooling
Manufacturing

Powder die filling: an essential process for quality tablets

Tablet manufacturing can be challenging; as such, an understanding of the steps leading up the final compressed product is crucial to the task of producing a high-quality tablet, reports Robert Sedlock, Director of Technical Training and Development, Natoli Engineering Company
Manufacturing

First impressions: Tablet shape can impact patient acceptance

This article discusses the limitations of the flat faced bevel edge and the benefits of a flat faced radius edge tablet design
Manufacturing

STEEL: The fundamental building block for tooling sets

Quality of steel should be seen as an inherently quantifiable attribute that is used to determine a steel’s ability to perform its designed function without limitation due to internal flaws or large variances in microstructure or homogeneity
Manufacturing

The key to tableting success: how to choose the right tooling

Choosing the right tooling can increase tablet output, decrease waste and ultimately determine the success of a product launch
Subscribe now