Pumps & valves round-up

Published: 1-Nov-2003


A new and specialist metering pumps division, known as Signal, has been established by Gee & Company of Birmingham. As part of its launch programme, Signal has rationalised and re-branded its wide range of pumps into three groups. Sales director, Barry Green, explained: 'Gee's core business for twenty-five years has embraced the application and supply of metering pump technology right across the water, effluent treatment and other industrial markets. info@signal-pumps.co.uk

Bronkhorst High-Tech has designed a portable calibrator to check the calibration of flow meters as well as pressure transducers/controllers on site. The Fluical portable calibrator contains a number of accurately calibrated digital flow or pressure meters in the ranges of 5ml - 1000l and 100 mbar - 20 bar. sales@bronkhorst.com

Bran + Luebbe, Lightnin Mixers and Waukesha Cherry-Burrell have been brought together by SPX to form a single international business entity, SPX Process Equipment. This development sees the Bran + Luebbe plant at Brixworth, UK, becoming one of the main supply centres for SPX process equipment for Europe, the Middle East and Africa.

ProMinent Fluid Controls' new version of its EXtronic dosing pump is now fully compliant with the latest ATEX directive, EG-EX-directive 94/9/EG. The short-stroke solenoid drive and complete pump control are integrated in the pump housing where the drive is not only protected against explosions, but also has contact and moisture protection IP65 in accordance with DIN 40050 even when the front cover is open. The EXtronic pumps have a capacity range from 0.23 -60 l/hr, and the liquid ends are available in Plexiglas, polypropolyene, Teflon, stainless steel 1.4404 or SB for combustible media. T +44 1763 262621, F +44 1763 262655 denis@inpress.co.uk

See more

You may also like

Medical Devices

Syensqo introduces medical-grade Amodel PPA for single-use, high-temperature medical devices

Read more
A new medical-grade Amodel PPA delivers high heat resistance, electrically insulative properties, and biocompatibility for advanced single-use medical instruments and assemblies

Trending Articles

  1. Continuous innovation: redefining the future of pharmaceutical manufacturing In an industry in which reliability is paramount and change can be slow, GEA has consistently proven that innovation and stability go hand in hand. Almost two decades ago, GEA introduced the first ConsiGma® continuous manufacturing (CM) system to the pharmaceutical market — a pioneering move that helped to reshape how oral solid dosage (OSD) forms are developed and produced
  2. Abselion launches AAVX and AAV9 Total Capsid Quantification Kits Ready-to-use solution for Amperia benchtop platform supports rapid, reliable quantification across a range of serotypes
  3. diaago and Peak Analysis & Automation partner to bring practical automation solutions to research laboratories Using diaago's customer-first approach with PAA’s decades of expertise in laboratory robotics, the collaboration promises to deliver solutions to streamline workflows, boost throughput and reduce bottlenecks
  4. Suncombe and Kindeva collaborate to deliver low-carbon inhalers to the NHS The partnership will develop next-generation pressurised metered-dose inhalers with low Global Warming Potential propellants, helping the NHS move closer to its Net Zero target
  5. Douglas Pharmaceuticals sets new benchmark for capsule quality with CI Precision Partnership delivers compliance confidence, efficiency gains and reduced waste

Upcoming event

Enhancing probiotic stability through smarter formulation and packaging strategies

18 September 2025 | Virtual See all

You may also like

Medical Devices

Syensqo introduces medical-grade Amodel PPA for single-use, high-temperature medical devices

A new medical-grade Amodel PPA delivers high heat resistance, electrically insulative properties, and biocompatibility for advanced single-use medical instruments and assemblies
Manufacturing

Sapio Sciences introduces world’s first 3rd-generation ELN

Sapio ELaiN is an AI-powered lab notebook designed to act as a scientific collaborator
Manufacturing

Signal Group launches MCERTS approved VOC emissions monitor

New SOLAR CEMNEX analyser offers advanced compliance and connectivity features
Research & Development

Genoskin raises $8.7m in its first funding round to advance its ethical, human-based alternatives to animal testing

The financing will drive Genoskin’s next phase of growth, with a view to scaling up operations in both the US and France
You need to be a subscriber to read this article.
Click here to find out more.
Packaging

Cloud labelling and serialisation: the new frontline of traceability in drug delivery

As drug delivery evolves to accommodate a new wave of data-driven innovation, the need for traceability and compliance throughout the supply chain is paramount. Innovative cloud-based solutions enable pharmaceutical companies to navigate these demands with confidence
Manufacturing

Sharp boosts autoinjector and pen assembly line capability with $20m investment in Pennsylvania facility

The money will boost its autoinjector and pen assembly, labelling and packaging lines across various therapeutic areas at its facility in Macungie, meeting the rising demand for injectables
Manufacturing

L.B. Bohle to showcase machines for OSD, food and nutraceuticals at PACK EXPO 2025

Company to present advanced blending, particle sizing and coating technologies at Las Vegas event
Subscribe now